WINTER IS COMMING! METEOR65 IS READY!
Meteor65, a leading 1S whoop WINTER TIME drone. This 22.83g lightweight whoop drone comes with a completely new look with a special micro canopy, supporting the serial ExpressLRS 2.4G, Frsky, or TBS RX version. Equipped with the BT2.0 connector, the lightest F4 1S 5A FC (2022), new 0802SE 19500KV motors, and C03 FPV camera. With the combination of those electronics and parts, it reaches the best balance between performance, weight, durability, and premium build design.
Meteor65 is the first generation whoop drone powered by a brand-new BT2.0 1S battery. The BT2.0 connector effectively decreases internal connector resistance for a much better discharge performance compared with the initial PH2.0 connector.
By using the latest 0802SE 19500KV motors and 31mm 3-blade props, this kit provides you with a completely different experience of a powerful indoor flight.
- Built-in 1.52g ultralight weight and upgraded C03 FPV camera. This new camera has optimal performance for indoor whoop drones.
- Adopt with injection molding technique, this canopy is 1.60g ultralight weight and is more durable, anti-ruin, and heat-resistant, providing good protection for the whoop drone.
- Reserve two UART ports on F4 1S 5A FC (SPI Frsky) board. The Frsky version also can be used as the PNP version. Therefore, pilots can connect the external receiver to it.
- F4 1S 5A FC (Serial ELRS 2.4G) is flexible in upgrading and has great potential. It supports being upgraded to ELRS V3.0 separately without flashing Betaflight flight controller firmware.
- The various colors of the spare parts including the 65mm frame, micro canopy, and propellers offer pilots more choices. Using them with BETAFPV waterslide decals, pilots can easily DIY and build their unique whoop drones.
- Item: Meteor65 1S Brushless Whoop (2022)
- Weight: 22.83g (without battery)
- FC&ESC: F4 1S 5A FC
- Frame: Meteor65 65mm 1S Brushless Frame
- Motors: 0802SE 19500KV Motor
- Props: 31mm 3-blade props (1.0mm Shaft)
- Tilt: 30° (default)/20° (optional)
- Camera: C03 FPV Camera
- VTX: M03 25-350mW VTX
- Canopy: Canopy for Micro Camera 2022 version
- Battery: BT2.0 300mah 1S Battery
- Flight time: 4 mins
BETAFPV exclusive designed BT2.0 connector has broken through the bottle-neck of PH2.0 connector. BT2.0 connector has decreased internal resistance of connector effectively allowing more current to be transferred, which means it supports 9A continuous current (15A burst). This means stronger power and longer flight time on 1S brushless drones while PH2.0 just supports 4.5A. You can enjoy more flight time without disturb of low voltage warning due to reducing voltage sag.
|Item||Meteor65 1S Brushless Whoop (2022)|
|Weight||22.83g (without battery)|
|FC&ESC||F4 1S 5A FC (ELRS)|
|Frame||Meteor65 65mm 1S Brushless Frame|
|Motors||0802SE 19500KV Motor|
|Props||31mm 3-blade props (1.0mm Shaft)|
|Tilt||30° (default)/20° (optional)|
|Camera||C03 FPV Camera|
|VTX||M03 25-350mW VTX|
|Canopy||Canopy for Micro Camera 2022 version|
|Battery||BT2.0 300mah 1S Battery|
|Flight time||4 mins|
1 x Meteor65 Brushless Whoop Quadcopter (2022)
2 x 300mAh 1S 30C Battery with BT2.0 connector
1 x BT2.0 Battery Charger and Voltage Tester
1 x TypeC USB cable
1 x Customized Carry Case
1 x Spare 31mm 3-blade props (1.0mm Shaft)
1 x Screwdriver
3 x Decorative Parts
1 x 20° Lens Camera Mount for C03 Camera
1 x 30° Lens Camera Mount for C02 Camera