GEPRC CineLog 35 Performance Analog Cinewhoop ELRS Drone - 6S
This is a FPV quad that combines Cinematic shooting, Freestyle, Racing and Cruising to satisfy your indoor & outdoor flying requirements in various scenes.
1. 3.5-inch integrated propeller guard, hollowed-out weight reduction and noise reduction design, quiet and safe flight,brand new appearance design
2.Equipped with GEPRC F722-45A AIO high-performance FC and integrated BLHeli_S 45A 6S ESC.
3.Caddx VISTA HD and Walksnail AVATAR HD digital image transmission system make the FPV image stable and clear, and restore true colors and details.
4.SPEEDX2 2105.5 motor with DT90-3 propeller, stable power output and smooth flight experience.
5.Reversed-motor design, higher flight efficiency, longer flight endurance, flexible flight attitude.
6.Comes with two 3D printed parts,which can be installed with GoPro cameras or Naked 8,10 Camera, Insta 360 GO2 and Caddx Peanut cameras.
7.Shock-absorbing gimbal design, more stable and clearer shooting, Without jelly any more.
8.The analog version uses RAD high power 1.6W VTX, stable signal transmission, strong anti-interference ability and longer signal transmission distance.
9.The GEPRC Team’s Splendid Tuning and the overall flight feel is delicate and flexible.
|FC system||GEP-F722-45A AIO|
|OSD||BetaFlight OSD w/AT7456E chip|
|VTX||RAD 5.8G VTX 1.6W|
|Antenna||GEPRC Momoda 5.8g MMCX RHCP 195mm Long Version Antenna|
|Weight||257.9g (CineLog35 Performance Analog 6S PNP)|
|Receiver||PNP, Frsky R-XSR, TBS Nano RX, ELRS2.4G|
|Battery||LiPo 6S 850mAh-1550mAh|
1 x CineLog35 Performance Analog
2 x HQ DT90-3 propellers (pair)
1 x Battery strap M15x200mm
2 x Battery silicone pads
2 x Landing pads
1 x Spare 3D printing parts
1 x Set of screws
1 x Set of screwdriver
1 x CADDX OSD menu board
1 x Antenna fixed tube