Description
To turn off the buzzer:
Press and hold the buzzer button for at least 2 seconds.
The JHE20B Finder is compatible with both BF and CF flight controllers.
Connect the buzzer wires to the corresponding connectors of the flight controller (red-5V; black-ground; yellow-BB) and you are ready to use.
If the wiring is correct, the drone's battery will charge the buzzer's battery and the red led will light up. If the red LED goes out, the battery is charged.
If the red LED is flashing, the flight controller has been turned off and the 30-second countdown has started before the beep.
Parameters
| volume | 110 dB |
| Dimensions (Length * Width * Height) | 10x20 mm |
| Mounting pattern | free |
| Weight | 2,7 g |
| Built-in battery | 75mah |
| Working time | 1 hour |
Package contents
1x buzzer
1x 3 pin cable
Reviews
Write a review!
20/10/2024
Verified purchase
A beépített LED fény szintén sokat segít a keresésben, még gyengébb fényviszonyok között is. Az akku hosszú ideig bírja, így biztos lehetek benne, hogy nem hagy cserben repülés közben.
The built-in LED light also helps a lot in the search, even in poor light conditions. The battery lasts for a long time, so I can be sure that it will not let you down during the flight.
The built-in LED light also helps a lot in the search, even in poor light conditions. The battery lasts for a long time, so I can be sure that it will not let you down during the flight.
11/06/2023
Verified purchase
2 aksi után kialudt a fehér led, de csipogni csipog.
After 2 batteries, the white LED went out, but it keeps beeping.
After 2 batteries, the white LED went out, but it keeps beeping.