Description
Firmwares:
ExpressLRS MATEK_2400_RX
Firmware update via UART or WIFI
ELRS-R24-S: disable “USE_DIVERSITY” (unchecked) when flashing in ExpressLRS configurator
Parameters
Dimensions (Length * Width * Height) | 21x15 mm |
Input voltage | 5 Volts |
Radio frequency | 2.4 GHz |
Weight | 3 g |
ESP8285, SX1280/1281IMLTRT | |
PA/LNA | SE2431L |
Antenna connector | IPEX MHF 1 |
RF Frequency | 2.4GHz (2400~2480MHz) |
Telemetry power | 22.5dbm~23dbm |
SE2431L RX_gain | 12.5dB |
Diversity (antenna-switching), default ANT2 | |
Receiver protocol | CRSF |
Input voltage | 4~9V DC @ 5V pad |
Power dissipation | 40~45mA(before binding), 70~75mA(binding), 90~95mA(wifi mode) |
Package included
1 x ELRS-R24-S
2 x IPEX MHF1 Antenna
Reviews

1 rating





Write a review!
Sándor Nagy Sarkadi
|

Verified purchase
14/08/2022
Brutálisan stabil vétel,lapka kicsit nagy a megszokott többi lrs vevőhöz képest, viszont a diversity antenna elrendezés nagyon stabil működést biztosít.
Jumper AION TX NANO 250mw on 8.5km és még bőven volt még benne.
Brutally stable reception, the chip is a bit big compared to the usual other lrs receivers, but the diversity antenna arrangement ensures very stable operation.
Jumper AION TX NANO 250mw on 8.5km and still had plenty left in it.
Jumper AION TX NANO 250mw on 8.5km és még bőven volt még benne.
Brutally stable reception, the chip is a bit big compared to the usual other lrs receivers, but the diversity antenna arrangement ensures very stable operation.
Jumper AION TX NANO 250mw on 8.5km and still had plenty left in it.