Description
METEOR65 PRO IS DESIGNED FOR EXPRESSLRS PILOT IN THIS WINTER!
Meteor65 Pro comes with a 35mm propeller for power improvement and a flexible flying experience. Beyond that, it has almost the same components and features as Meteor65, like F4 1S 5A FC (2022) with built-in serial ExpressLRS 2.4G, Frsky, or TBS RX version, up to 350mW M03 VTX, 19500KV 0802SE motors, C03 FPV camera etc, All aspects of performance are perfectly balanced.
Bullet Point
- By using the latest 0802SE 19500KV motors and 35mm 3-blade props, this kit provides you with a completely different experience of a powerful indoor flight.
- Built-in 1.52g ultralight weight and upgraded C03 FPV camera. This new camera has optimal performance for indoor whoop drones.
- Adopt with injection molding technique, this canopy is 1.60g ultralight weight and is more durable, anti-ruin, and heat-resistant, providing good protection for the whoop drone.
- Reserve two UART ports on F4 1S 5A FC (SPI Frsky) board. The Frsky version also can be used as the PNP version. Therefore, pilots can connect the external receiver to it.
- F4 1S 5A FC (Serial ELRS 2.4G) is flexible in upgrading and has great potential. It supports being upgraded to ELRS V3.0 separately without flashing Betaflight flight controller firmware.
- The various colors of the spare parts including the 65 Pro 65mm frame, micro canopy, and propellers offer pilots more choices. Using them with BETAFPV waterslide decals, pilots can easily DIY and build their unique whoop drones.
Specification
- Item: Meteor65 Pro 1S Brushless Whoop (2022)
- Weight: 23.01g (without battery)
- FC&ESC: F4 1S 5A FC
- Frame: Meteor65 Pro 65mm 1S Brushless Frame
- Motors: 0802SE 19500KV Motor
- Props: 35mm 3-blade props (1.0mm Shaft)
- Camera: C03 FPV Camera
- Tilt: 30° (default)/20° (optional)
- VTX: M03 25-350mW VTX
- Canopy: Canopy for Micro Camera / Canopy for Micro Camera 2022 Version
- Battery: BT2.0 300mah 1S Battery
- Flight time: 4.5 mins
Meteor65 Pro Frame & 35mm Propeller
Meteor65 Pro frame has the same perfect performance as the popular Meteor65 frame. The lightest lower profile 65mm frame to fit 35mm propellers. The battery slot is closer to the center of gravity for a smoother flying experience, and you will land on the motor screws instead of the battery.
Parameters
Item | Meteor65 Pro 1S Brushless Whoop (2022) |
Weight | 23.01g (without battery) |
FC&ESC | F4 1S 5A FC (SPI Frsky) |
Frame | Meteor65 Pro 65mm 1S Brushless Frame |
Motors | 0802SE 19500KV Motor |
Props | 35mm 3-blade props (1.0mm Shaft) |
Camera | C03 FPV Camera |
Tilt | 30° (default)/20° (optional) |
VTX | M03 25-350mW VTX |
Canopy | Canopy for Micro Camera 2022 Version |
Battery | BT2.0 300mah 1S Battery |
Flight time | 4.5 mins |
Package included
1 x Meteor65 Pro Brushless Whoop Quadcopter (1S)
2 x 300mAh 1S 30C Battery with BT2.0 connector
1 x BT2.0 Battery Charger and Voltage Tester
1 x TypeC USB cable
1 x Customized Carry Case
1 x Spare 35mm 3-blade props (1.0mm Shaft)
1 x Screwdriver
3 x Decorative Parts
1 x 20° Lens Camera Mount for C03 Camera
1 x 30° Lens Camera Mount for C02 Camera